9pc 8-32mm Blind Hole Inner Bearing Puller Set Remover Slide Hammer Internal Kit

So please check - are you trying to pull a bearing out from the inside of it where space doesn't allow any other type of puller?If so this is the kit for you - select the largest possible size that fits and use that - if you are right on its limit then consider grinding one down to fit rather than cranking one up to its maximum.I was looking at the 25-30mm Geodore Internal Extractor - 8013560 which was one extractor for £89.99 + the slide hammer £43.99 - so we saved a lot and can do more with this kit.This pulled a bearing out beautifully in a worm drive gearbox (see pic)Not sure about the "couldn't pull a skin off a rice pudding" man, but may well have been user error? I feel that was an unfair review.

I've bought this to remove a blind bearing from a gearbox and it made the job a breeze.The expanding collets benefit from a touch of oil on the threads to make them move more smoothly but once expanded they hold fast.I find if you expand the collet until it just fits into the bearing and then slide it into the bearing contacting one side you will feel when the step where the bearing ends. You can then expand it until it holds.Just mind you don't get any part of your hand between the sliding hammer and retaining bar as it hurts!

Simple to use. The bearing removal carried out with ease. To be noted. Some heat (Heat Gun) was locally applied prior to the removing the bearing.

8mm puller arrived with only 2 out of 4 of its fingers.....faulty manufacture/poor quality control!Returned for refund.

Nice item for the prices, I'm very happy

After having bad luck with a different bearing puller I opted for a kit that seemed a bit higher quality. Unfortunately this was not it.This tool kit was bought solely for the purpose of removing needle bearings from the gearbox housing on Honda Lawnmowers, however when I inserted the bearing puller and tightened it down, it still felt a bit loose, I tightened it a bit more but could feel it was at its limit, grabbed the slide hammer and assembled that onto the puller and gave it a light yoink and the puller moved but the bearing didn’t.Not exactly the ideal scenario, so I went again and double checked everything and same thing happened, I opted for the larger size but it wouldn’t fit in the bearing. Upon closer inspection the chamfered end certainly didn’t look like the drop forged heat treated attachment the listing proposed as it had gouges taken out of it.It’s my opinion the shoulder on the puller is not quite aggressive enough and the steel not quite “springy” enough to work together to get behind the bearing and pull it out, rather it just slides off the outer face when put under pressure.Certainly wouldn’t want to use this kit ever again, time wasted and a job still waiting to be done!

That is great, thank you.

Purchased this item and worked first time after using a heat gun to remove motorbike wheel bearings. Wasted money buying an inner bearing puller which didn't work. Well worth the money.