BETAFPV 4pcs 1103 11000KV Brushless Motors FPV 2S Motor RC for 2S Lipo Battery 2S Frame Beta75X Whoop Drone

Really love how this motors looks: The magnets are really good and the silicone wire is a nice touch. The connector will made the things easier for those who not like to solder. Till now, my FC has not arrive, so I did test the motors with a 6a ESC and a 2s 300 mah. These motors have a tons of power. I can't wait to test it in the air.As always, happy flying!

These motor have yet to let me down. This is my 8th set on 8 different qauds. I have even had them on heavier qauds but will say they are put to work on a heavy qaud. I would recommend these to anyone.

Yes! These little things are great so far, Im putting them through their paces on my HD whoop build.The original 0802 motors I had been using from another company were getting frighteningly hot because of the extra weight of my build, so I purchased these, and the Beta75x frame and now Im getting 2:30 - 3:00 flight time on my HD Whoop build with my current tune, and no signs of hot motors.I recommend them if youre building a cinewhoop or 2s whoop.

these are 4 bolt motor design but are m1.7 which makes these useless unless you are using betafpv frames. It also took me 2 tries to get these motors as the first one disappeared coming to me and took over 2 weeks to get. Disappointing because every frame out there that needs to use 1103s i know of are m2 motor mount with 4 holes.

These motors are great motors, I just had a problem due to the connector cables are only an inch long so I had to rethink my build, but I had accommodating frames waiting to be used anyhow so it still worked out well.

I bought 2 packs of these motors for a mini octocopter. Before I even tested the motors, it was clear that something was up with them. they didn't spin like normal motors, and they felt gritty, as if there was some debris between the magnets and the coils. I shook them, and nothing rattled, so I figure it must be poor, uneven coiling of the copper wire. Occasionaly, I could achieve smooth spinning on the affected motors for 2 or 3 spins before the problems would resume, but I was unable to clear any of the obstructions. When I hooked the motors up to power, the 2 motors that were gritty immediately started smoking, so I assumed they were dead. I tried once more, and they sputtered before shutting themselves off. Now every time I attach them to power they do the same thing. The other 6 motors work nominally.

I did verify all the motors worked when they arrived, just in case.They all worked well and no issues on wires or connectors.It's nice to have spares, in case I break a motor in a crash.

Very satisfied with purchase. Purchased two sets of these because one of the motors in the first set broke from minimal handling. I may have not paid attention and been too rough, but the ESC wires could be manufactured better. I recommend these to beginner builders for price and performance.