Ideagle 2 Pack Universal Grip Sleeve Silica Gel Full Size Pistol Grip Glove

Works well on a 44 magnum pistol, does a good job absorbing the recoil.Like it enough I put one on several of my pistols.

Feels comfortable

Easy to install, facilitates a good grip.

When I opened the package and took out one of the sleeves, I found it had a tacky/sticky feel to iton the inside and outside. I have a lot of experience with elasto-polymers like silicone so thenext think I checked out was how elastic it was for its thickness. Seemed to have a good bit of giveto it so I decided to try to slip it on over the rather small/narrow grip of my .22 handgun. Would neverbuy it for a Glock or any normal sized grip or larger. I know well enough to lift and stretch the rubberas I move it up the grip or handle. Got about halfway when the sleeve developed a fracture/tear rightalong what looks like the mold's seam where the two halves meet. More than likely, the mold eitherdid not fill properly or the elastomer material started to set and cure before it totally filled the mold.Now, IF you want to buy this sleeve, the safest way to prep it to be slipped on to your grip(s) would be tosoak it in rubbing alcohol. The alcohol gets into the rubber's elastomeric network making it slippery(inside and outside surfaces) AND more "spongy." DON'T try to apply the alcohol to one spot whereyou are having trouble moving the sleeve or you are likely to cause it to fail and rip or tear.The whole sleeve has to be spongy and slippery to work. Practice how you you want the sleeve tofit onto your grip -- use the mold seam line as a guide to keep things "straight" (no more or lessmaterial or pressure on one side or the other. Again. If you need to make an adjustment, lift thesleeve off of the grip a bit or slide a thin piece of stiff plastic (like an old credit card cut to size)to break tension between the sleeve and grip to move it. Really important if your grip is heavilycheckered or "roughed" of by the manufacturer to create a feel for the grip. Good Luck.

Used these on my Umarex Trevox and a Beeman P-17. Both pistols have the nice Polymer body/pistol grip on them but when you add these grips it really makes the shooting better. I will order more for some of my other bb/pellet guns. Now I wished I would have taken some pictures to show how nice they look. Excellent product.BONUS! I am even considering putting these on my tennis racket. I think these would work better than a that high-priced racket handle tape. If I can think of other things I need to get a better positive grip on, then I’m getting more and installing them on ANYTHING with a handle etc. Very happy with purchase.

Very comfortable sleeve installed on my ATI top folding pistol grip shotgun stock. Easy to apply, let it sit in hot tap water for 10 mins. Spray pistol grip and the inside of the sleeve with windex. Give the sleeve a nice stretch in all directions for 20 seconds before you put it on. Fits nice and snug after the windex dries. Was not hard at all to put on. Stretch it as you slide it on.

Just got them today, went to put on & it tore. Put the other one one & it was so slippery my gun almost fell out of my hand numerous times. May be good if your wearing gloves & the gun is a bb gun, either way I'll stick to buying Pachmayr or Hogue, I have bought them & never had issues. Guess thats what happens when you try to save a dollar.

Worked VG on my 38 snubby and w/o any trimming. Yea!Conformed to finger ridges better than expected.Usual trickiness to get it on. (Warm it up then get under it to push/pull a little at a time from all sides.)It is sticker and cushier than expected... just fine with with that.