10Gtek 𝟭𝟬𝗚𝗕𝗮𝘀𝗲-𝗧 𝗦𝗙𝗣+ 𝘁𝗼 𝗥𝗝-𝟰𝟱 𝗧𝗿𝗮𝗻𝘀𝗰𝗲𝗶𝘃𝗲𝗿, 10Gbe SFP+ Copper Ethernet CAT6a Module, up to 30m, for Cisco SFP-10G-T-S, Ubiquiti UniFi, Fortinet, TP-Link and More

This transceiver worked great in another switch I purchased from Amazon with a no-name Chinese company. I also used it in media converters (fiber to copper) for connecting directly to my computer. It automatically negotiates the speed and was extremely easy to install. It was also compatible in my Intel X710 network card that runs the network for my server to connect to my coax cable modem. The fact this SFP supports multiple speed options is also great because I connected it to a switch with only 10G but it worked fine connected to a 2.5G copper RJ45 jack without any errors, so it must negotiate and rate limit within itself.

Works in my UDM Pro Max and getting a full 10Gbe connection to my fiber ONT. While set to 10Gb on the SFP+ port, it still connected to a 1Gbe Ethernet on my old ONT just fine. It does run a bit hot like it says on the package. Heat is typical for these adapters. I added heat sinks like another reviewer and dropped running temps a few deg C. Install was simple, just plugged it in and plugged in an Ethernet cable.

Excellent SFP+ Module. Came in a very nice and minimal package, plugged directly into the SFP+ Port of my Sophos CS110-24FP Switch. I first plugged in my machine's 1Gbps port and got 1Gbps link, then I plugged in the 10gbe port and got 10gbps over ~12m of Cat5e. Great stuff! It wasnt perfectly documented if this would be compatible so I am really happy to see it's plug-and-play. I went ahead and ordered the 1/2.5/5/10gbps model to test on some other devices.

Works like a charm, but very hot. Stayed within the documented temperature range/norms when I checked with my thermal camera so I don't expect any issues. The heat makes me nervous for my kids long term however, so I am using this as a short term stopgap.

Works well, although like another reviewer mentioned it won't work/negotiate at a lower 100mb speed. Using it in a trendnet 2.5gb switch.

Works great with my Ubiquity Dream Machine Pro. Plugged it in and it just worked. Well worth it for 10 Gbps connection to my switch using CAT 6a patch cable.

These are working great. I have them slotted into a Grandstream switch and there were no issues with it translating my older 1GB network stuff to the 10GB.

I bought this to add RG45 to my Unifi Aggregation switch. I was able to run 10gbE but these ran so hot that I decided to get an SFP+ optical cable instead. Problem was that this transceiver got stuck in the port and there was nothing I could do to remove it. After two hours of trying to find YouTube videos showing how to remove stuck transceivers, I had no choice but to use pliers and remove it by force. Of course the force destroyed the handle and the plug arm. It became unusable. Wasted money if you ask me since it can only be used if you never ever plan to remove it from the port.