Tech Armor HD Clear Film Screen Protector Designed for Apple iPhone 6 Plus and 6S Plus 5.5 Inch 3 Pack

This screen protector has done a great job of protecting my phone for the past three months. The clarity is amazing and I haven't had any issues using my touchscreen through the screen protector. The product came with 3 screen protectors, and I just had to remove the first one and apply the second. Something sharp in my pocket must have caught on it and snagged it somehow. At any rate, I tried for weeks and the bubble caused by the snag just wouldn't go away. But the screen protector did its job. I can only imagine what would have happened to my actual screen had it not been there. Tech Armor offers a Hassle-free Lifetime Warranty, so I'm entitled to request a replacement, which I may do. But in the meantime, I simply applied one of the other screen protectors that came in the 3-pack.While applying the new screen protector, I was reminded of one thing I found annoying when I applied the first screen protector. The instructions indicate that you are to peel back the plastic sheet and begin applying the screen protector from the bottom of the screen, lining up the cut-out at the home button, then working upwards toward the top of the phone to line up the cut-outs for the speaker and camera. But the "Peel Here" stickers are positioned at the top so that you must peel back the plastic sheet and begin applying the screen protector from the top of the screen, lining up the cut-outs for the speaker and camera, then working downwards toward the bottom of the phone to line up the cut-out for the home button. This may have something to do with the fact that I received one of the early versions with the U-shaped cut-out for the home button instead of the circle cut-out. Perhaps the instructions are written for that type, but for screen protectors with the U-shaped cut-out, it's better to line up the cut-outs at the top and work toward the bottom, but it wasn't worth reprinting the instructions for this temporary version.

I just received my new iPhone 6 Plus. I've used Tech Armor before and had excellent experience so I bought it again for my new phone. I wasn't disappointed. Everything from the instruction set to the product is excellent. Between their helpful hints for installing and their link to an install video, they've done an excellent job trying to help a buyer install their product properly.I usually don't read directions but in this case I did. I cleaned the phone with a lightly moistened lint free towel that I sprayed some Windex onto. Then I buffed the glass with their micro cloth. Then I used the lightly sticky tap to remove some tiny dust specks. I suggest doing this under a fluorescent light so that you can see any tiny specks that land on the screen. There is more airborne dust particles than you realize and they seemed to home in on my screen! :-)If you follow their steps, and are very careful with the alignment you should have little to no problem. I peeled off protective layer #1 and started aligning the protector. Just be patient with your alignment. I missed slightly the first time and as they suggested, peeled it off and re-centered it. Second time was a charm!Using their included plastic tool for rubbing out air bubbles was easy and took about two minutes to move all the bubbles to the edge and then they were gone. Once I was satisfied with that I pulled off protector layer #2 and buffed the protector film with the micro-cloth.The new iPhones have a rounded edge so they can't cut the protector to exactly the edge otherwise it would be prone to being snagged at the edge and pulled up over time. But, they did cut the protector within a hair of the edge and I'm confident that it won't peel up. If you're using any type of case you will not notice the tiny gap because the case will cover over it.I'm extremely pleased and continue to feel TechArmor makes an excellent product at a very fair price. Considering there are 3 protectors in the package, I will save the other two to re-fresh the protector in the future.

Let me begin by saying that this review is based solely on the product's application and obvious features - NOT on its protective abilities, since I've only had it on for a few moments.First, this is not the "easiest to install in the market," as their videos claim. That's simply false advertising. In terms of application, the Tech Armor product is essentially the same as many other iPhone screen protectors - it comes with a back and front cover on each screen protector, a microfiber cloth and a squeegee card to help squeeze out bubbles. Tech Armor does include four little pieces of "dust removal tape" but scotch tape works just as well. (The fact that they include three screen protectors - as many brands do - suggests at the difficulty you may have in putting this on.) But the process is the same as for virtually every other film screen protector out there -- Tech Armor does not include some magic tool that will apply the film bubble-free. To that end, Tech Armor (like some of its competitors) has several videos on YouTube that show how best to apply the film. Again, these suggestions work on pretty much all film screen protectors. I've been putting films like these on iPhones for years and nothing much has changed in terms of application; Tech Armor is no different.What makes this application MORE difficult, however, is the fact that the screen protector is so narrow. It is barely wide enough to just cover the actual black screen - not the rest of the front of the iPhone. There is less than a millimeter to spare, if that. So, it will probably take you several tries to line this protector up EXACTLY if you want it to fully cover the screen. You may notice this when you start at the top, seemingly nice and even, but by the time you lift your hand off of the bottom, having placed the protector fully down to the home button, the protector is ever so slightly misaligned, and that means part of your screen will be unprotected. Maybe that's not a concern to you - especially if you have a bigger case. But if you have a slimline case like I do, you'll probably want the full screen protection. Tech Armor provides an "important note" cautioning you to make sure the screen protector is only on the flat part of the screen, not the curved part of the iPhone, as that may lead to the screen being lifted off during use and dust sneaking in. Fair point, but since most iPhone cases cover the sides and part of the top face of the iPhone, Tech Armor could have made their protectors just a little bit wider to (1) give you more coverage of the screen and (2) to make it a little easier to install. And this is so narrow that if you apply the film onto the curved part of the iPhone, then part if your screen will very obviously be left unprotected.As I said in the beginning, I can't really judge the impact resistance because I'm not willing to drop or intentionally scratch my iPhone for the sake of this review! However, I did take one of the screen protectors that I had to discard because of dust and scratched it with a key. You can certainly tell where the key scratched the film. But it didn't go through, so I'm guessing an iPhone underneath would have been protected - although with a direct scratch like that you'd probably want to then replace the screen protector afterwards so you didn't have to keep looking at the scratch. I will update the review after the screen protector has been through some daily wear and tear. Though I'm also going to look for a slightly larger one.

Great screen protector-- I was expecting a lower quality product due to the cheap price but it was as crystal clear as any of the more expensive alternatives-- and you get 3 of them! It sticks out a little bit near the edge, as expected, because the iPhone 6 has a curved screen, but I got used to it almost immediately and it hasn't been an issue. The package comes with everything you need, even a dust sticker, and has been very easy to put on.

Fantastic screen protectors and very high quality. Applied easily and bubbles were very easy to move with the included tool. probably the best value for money on amazon quality/price wise.

Purchased this screen protector for my new iPhone 6 plus.The quality of the protector is crystal clear, and easy to install.Too bad the protector does not cover the phone screen completely due to the curved screen of iPhone 6 / 6+, but it has nothing to do with Tech Armor.It is my first time using Tech Armor screen protector and I am extremely satisfied.Would definitely buy again for the quality.

Fantastic product! Very easy to apply and the tutorials were there to help me. Would recommend this product to anyone. It's a must for anyone with an iPhone

Never disappointed with the quality of Tech Armour products. Easy instructions for installation and great product quality for the value. I keep going back time and time again.